Filtration

Internal filters are the main-stay of aquarium filtration, providing a system within the tank with no risk of leaks and a simple set up. Usually consisting of a filter box full of filter media, usually sponge, and a powerhead that pulls water in through an inlet on the bottom. The water is then pulled up through the filter media where any dirt in the water is collected by the filter media and then the clean water is pumped back out into the tank.

The filter media is removed and cleaned as often as required, usually simply by washing it in a bucket of water from the tank in order to preserve bacteria.

Under-gravel filters consist of a base plate and an uplift tube. The base plate is put on the bottom of the aquarium before any gravel has been added. You then cover the plate in over an inch of gravel. The uplift tube is connected to the base plate and a powerhead is placed on top of the uplift tube. This causes water to be sucked through the tube, which in turn causes water to be sucked through the base plate. As this water is being sucked through the gravel into the base plate any dirt in the water is dragged down into the gravel.

To clean this filtration system you require a gravel cleaning syphon, which you then use to syphon through the gravel dragging all of the dirt out into a bucket without sucking out any of the gravel.

External filters are sealed canisters which sit outside of the aquarium and are composed of an inlet tube and an outlet tube that are submerged in the tank. The water is pulled into the filter where it undergoes a more rigorous cleaning system than a traditional internal filtration system.

These large external filters are usually recommended for larger tanks with a lot of biological matter inside.